|
Ocena wątku:
- 0 głosów - 0 średnio
- 1
- 2
- 3
- 4
- 5
erap2
Początkujący
Liczba postów: 8
Dołączył: Mar 2014
Reputacja: 0
|
RE: Root Acer Iconia Tab A1
Znalazłem takie coś, jak widać z postów pod spodem działa, lecz chyba tylko na UBUNTU, dlatego jeżeli jest ktoś kto jest w stanie to zrozumieć i przetłumaczyć to bym był wdzięczny
Kod:
Been working at this for several days now, and finally figured it out. The problem is NOT with the IconiaToolkit as that WORKS as advertised (on a Linux system that is). My problems over the past several days have been to get a properly installed and configured Linux system to recognize my tablet. This morning, I started from stratch for the 3rd time and simplicity got it right.
1> Installed a new "32 bit version" of LUBUNTU 13 downloaded from their website. (I tried 64 bit installs of Ubuntu 12 and then 13 and while they would see the tablet's file storage, could not get the Toolkit to connect). I went with Lubuntu 13 because it was the "lite" version. The key I have read is going with the 32 bit version.
2> Open up a UXTERM (terminal window similar to a DOS command window in Windows) and install a couple of required packages for the Android by giving the following commands:
sudo su
sudo apt-get install android-tools-fastboot android-tools-adb
3> Now create a new folder in the /bin folder called IconiaToolkit with this command: sudo mkdir /bin/IconiaToolkit
4> Now make sure you have access rights to this new folder with command: sudo chown user:user /bin/IconiaToolkit
in the line above, replace the "user:user" with whatever user name you set up for yourself when you installed Lubuntu (ie: bob:bob)
5> Now open up internet browser in Lubuntu and download the IconiaToolkit v0.8.1
6> In Lubuntu, open FileManager PCManFM and double click on the Downloads folder, then right click on the IconiaToolkit.zip icon and say "Extract to" and specify /bin/IconiaToolkit as the destination folder.
7> Now back in your Xterm window, go to the toolkit directory with the command: cd /bin/IconiaToolkit
8> Verify you are there with the command: ls (you should see a file called toolkit.sh among other files.
9> Now per instructions of the toolkits README file, enter the command: chmod +x toolkit.sh <enter> followed by the command: ./toolkit.sh <enter>
you should now see the menu for the rooting script.
I selected Option 2 for my A1-810 device followed by Option 1 - Root and then Option 1 again, ROOT FROM SCRATCH.
Takes about 12 to 15 minutes - but was super easy once I got the correct Linux environment set up.
All of the credit goes to Eton Jackson for his script and all of the other folks who contribute information to these forums. MANY THANKS to ALL.
|
|
18-03-2014 16:15 |
|
Botek
Przyjaciel
Liczba postów: 78
Dołączyłczy: Nov 2012
Reputacja: OK
|
|
Dzisiaj 07:15 |
|
Cebu
Użytkownik
Liczba postów: 86
Dołączył: Sep 2013
Reputacja: 1
|
RE: Root Acer Iconia Tab A1
W tym poradniku jest, że można uruchomić system bez instalacji, ale ze swoich obserwacji wiem, że takie działanie nie zawsze pozwala na korzystanie z zaawansowanych funkcji. Ściągnąć i odpalić system jednak możesz celem weryfikacji czy coś tam możesz podziałać. Jak sam nie zainstalujesz systemu nie rozwiążesz problemu. My nawet jak zainstalujemy coś takiego to nie mamy sprzętu, aby to zweryfikować.
Jeśli będziesz miał aktualizację (posiadanie roota nie przeszkadza w aktualizacji systemu Android), ale po dokonaniu aktualizacji wszystko wróci do ustawień producenta i root na 99,9% zniknie. W tych niskobudżetowych tabletach to jest tak, że dostajesz nową paczkę nowy system, który wgrywa się od nowa zastępując stary. U Ciebie może akurat będzie jak w telefonach, że zaktualizujesz i programy ustawienia zostaną zachowane, ale root raczej zniknie, bo pliki systemowe będą oryginalne niemodyfikowane, także jak masz na dniach aktualizować to chyba nie masz, co się męczyć, a na pewno warto mieć najnowszy system.
Jednak dla testów, jeśli nurtuje Cię pytanie czy się da zrootować czy też nie ten tablet możesz jak piszę pobrać Lubuntu odpalić bez instalacji system i sprawdzić poszczególne rzeczy czy coś tam możesz działać. Jak się daje spróbować możliwości z root będziesz widział jakie są efekty, ale obawiam się, że tworzenie katalogów, kopiowanie kiedy system nie leży na dysku może być trochę problematyczne.
|
|
19-03-2014 11:24 |
|
Botek
Przyjaciel
Liczba postów: 78
Dołączyłczy: Nov 2012
Reputacja: OK
|
|
Dzisiaj 07:15 |
|
Użytkownicy przeglądający ten wątek: 1 gości
|
|